GRATIS VERZENDING BIJ BESTELLINGEN VANAF € 150
Doorgaan naar inhoud

RAM Mounts Cradles RAM-HOL-ZE25PDHU

RAM Mounts Form-Fit-houder (vergrendeling) voor Zebra ET60/65

SKU RAM-HOL-ZE25PDHU
Series: RAM Mounts Cradles
Uitverkocht
€308,16
incl. btw €372,87
Binnenkomende eenheden, beschikbaar voor aankoop
1 jaar ondersteuning op locatie

Laat het me weten als het weer op voorraad is

Request a quote for volumn pricing

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 12VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.
Chat met een expert
Krijg ondersteuning van onze experts in barcodeprinters! Snelle, betrouwbare ondersteuning voor installatie, verbruiksmaterialen en al je vragen Nu hulp krijgen

Betaalmethoden

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Verzendmethoden

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Beschrijving
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 12VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.

Specificaties

Technische informatie RAM MOUNTS CRADLES RAM-HOL-ZE25PDHU

  • Fabrikant RAM Mount
  • Printerserie RAM Mounts Cradles
  • Cadeaubericht beschikbaar No
  • Garantie 36 maanden

Verzending
Shipping

Veilige verzending

We werken samen met bedrijven zoals: DHL, UPS, Correo Express y TXT.

Bestellingen vanaf € 150 worden gratis verzonden naar landen binnen de Europese Unie en worden binnen 2-3 werkdagen geleverd (Canarische Eilanden, Ceuta en Melilla uitgesloten).

Verzendmethoden

  • Verzending binnen 24 uur
  • Standaardverzending
  • Gratis verzending
  • Gratis afhalen in de winkel
Beschikbare verzendopties bekijken

Onderhoud

Ons bedrijf biedt verschillende soorten onderhoud. Je kunt een onderhoudscontract bij Barcode Site aanvragen dat aansluit bij je behoeften, afhankelijk van de apparatuur of de periode waarin je onderhoud nodig acht.

Voor meer informatie kun je een e-mail sturen naar info@barcodesite.com

Accessoires

Compatibele accessoires voor RAM Mounts Cradles

Modellen uit de serie

Andere producten uit de serie RAM Mounts Cradles
Chat met een expert

Betaalmethoden

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Verzendmethoden

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner